BL Firmware

tip

• Please note the bootloader has been pre-flashed at factory, no need to flash again
• C8P can only use the built-in host software for flashing

SSH into the Host

Warning

• A WiFi connection to the host SSH is required before flashing the BL firmware

• First, please: Connect to the host SSH via WiFi

---

Flashing the Firmware

• Switch the DIP switch upwards and connect the USB of the target device to the host

  

• Enter the command below to start flashing BL

  fly-flash -d auto -u -f /usr/lib/firmware/bootloader/hid_bootloader_h723_v1.0.bin